Welcome to Triflex Hydraulic and Services Limited

Monday - friday : 8:00 AM to 5:00 Pm

Staff Webmail

Products Line

about titan builders photo

PRODUCTS LINE

PRODUCT LINES (Fitting Line): Our crimping fitting range is composed of about 2000 references meeting the main international standard. (SAE, DIN, BSP, JIC, ORFS, ETC)
The crimping fittings range is segmented as follows:
1] Multi Fit Type; High tech crimping fitting, representing a universal solution for spiraled and braided hose in order to reduce production, distribution and assembly cost
2] Inter Lock Type; This is for a very high pressure spiraled hose in heavy duty application to satisfy severe safety and long service life requirements
3] X-tra Lock Type; This is a new fitting concept designed for ultra high pressure hydraulic power lines and water blasting application
4] Push—Lock Type; this is an insert solution for low pressure application without crimped ferrule
5] Pre-Crimped Type; the pre-crimped fitting range with pre-crimped ferrule, corresponding to the U.S standard requirements

Product Line Sheet

Hydraulic Hose:
 R2AT HOSE; 1/4", 3/8", 1/2", 5/8", 3/4", 1", 1-1/4", 1-1/2", 2"
 100R4 HOSE; 3/4",1",1-4", 1-2"
 100R5 HOSE; 3/6", 1/4", 5/16", 13/32", 1/2", 5/8", 7/8", 1-1/8", 1-3/8", 1-13/16",
 R13 HOSE; 1/4", 1-1/2", 2", (2" available with crimped on 2" fig. 1502 hammer unions)
 4SP/4S HOSE; 3/8", 1/2", 5/8", 3/4", 1", 1-1/4", 1-1/2", 2",
 HJK (10,000 PSI) 1/4", 3/8",
 WATER BLAST (10,000PSI) HOSE; 1/2",
 CHEMICAL HOSE; 2",
 PUSHLOCK HOSE;1/4", 3/8",
 PETROLEUM LAYFLAT; 2", 3", 4",
 ADAPTERS

TANK TRUCK HOSE & FITTING:
 TANK TRUCK; 2", 3", 4", 6"
 LAYFLAT; 3", 4"
 CRIMP ON FITTINGS; 2", 3", 4" NPT
 CLAMP FITTING; 2", 3", 4", 6" NPT
 CAMLOCK CONNECTION; 2", 3", 4", 6"
 CAMLOCK GASKETS; 2", 3", 4", 6"
 CAMLOCK RING; EARS AND PIN; 2", 4", 6 "
 CAMLOCK DUST CAP/PLUGS; 2", 3", 4", 6"

AIR HOSE:
 RED AIR HOSE; 1/4", 3/8", 1/2", 3/4", 1"
 YELLOW TEXTILE; 2"

TEFLON SS HOSE:
 1/4", 3/8", 1/2", 3/4"

HAMMER UNIONS:
 FIG;2", 3", 4"
 FIG;2", 3", 4"
 FIG;1"
 FIG;3", 4"
 FIG;2"3", 4"
 CRIMP ON; FIG. 1502


VALVES:
 BALL VALVES LOW PRESSURE (400 PSI); 1/4", 3/8", 1/2", 3/4", 1", 1-1/4 ", 1-1/2", 2", 3", 4 "
 BALL VALVES HIGH PRESSURE BKH STYLE;1/4", 3/8", 1/2", 3/4", 1"
 TODO COUPLING; 2", 3"
 NEEDLE VALVES; SS 1/4", SS1/2", CS1/4", CS1/2"
 BUTTERFLY VALVES; 2", 3", 4 ", 5", 6", 8", 10 ", 12"

KING COMBINATION NIPPLES:
 KC NIPPLES; 2", 3", 4", 6"

BARREL NIPPLES:
 SCH.40 2" X 4", 3" X 6", 4" X 6", 6" X 6", 8" X 8"

CLAMPS:
 BREEZE CLAMP; #4, #6, #8, #10, #12, #16, #20, #24, #28, #32, #36, #40, #44
 DOUBLE BOLT; 2", 3", 4", 6"

GRIPPY CLAMPS:
 USED TO ATTACH ELECTRONIC SUBMERSIBLE PUMP CABLE OR CONTROL LINE TO THE PIPE

GAUGES: COMES IN BOTTOM MOUNT, CENTER, MOUNT OR PANEL MOUNT
 2-1/2" FACE; 60PSI, 100PSI, 1000PSI, 3000PSI, 5000PSI, 10000PSI, 15000PSI
 4" FACE; 1000PSI, 3000PSI, 5000PSI, 10000PSI, 15000PSI, 20000PSI
 VACUUM GAGES

CHEMICAL: TRIETHYLENE GLYCOL

QUICK DISCONNECTS:
 ANV SERIES; 1/4 ", 3/8", 1/2", 3/4", 1"
 HNV; 1/4", 3/8", 1/2", 3/4", 1"
 TNV; 1/4 ", 3/8 ", 1/2", 3/4", 1", 1-1/4"
 PVV SERIES; 1/4", 3/8"

CROWSFOOT CONNECTIONS:
 CROWSFOOT X MALE; 3/8", 1//2", 3/4", 1"
 CROWFOOT X FEMALE; 3/8", 1/2", 3/4", 1"
 CROWFOOT X HOSE SHANK; 3/8", 1/2", 3/4", 1"
 CROWFOOT X CRIMP ON FITTING; 1/2", 3/4", 1"
 REPLACEMENT ASKETS

WHIPCHECKS:
 WHIPCHECKS 1B
 WHIPCHECKS 2B

CRIMP FITTING & ADAPATERS:
WE HAVE ALL OF THE COMMON CRIMP FITTING USED ON HYDRAULIC HOSE AS WELL AS THOSE THAT NOT SO COMMON, SUCH AS BRITISH, GERMAN, DIN AND JAPANESE. WE HAVE A WIDE RANGE OF ADAPTERS IN STOCK AS WELL

JET LUBE:
 KOP'R KOTE
 RUN-N-SEAL
 TAPERED DOPE BRUSHES

PRECISION DIE:
 TONG DIES
 HANDLING TOOLS DIES
 CHROME DIES

PRESSURE TEST AND CERTIFICATION:
 HYDROSTATIC TEST
 HYDRAULIC HOSE CERTIFICATION